Logo Leibniz Universität Hannover
Logo: SFB 871
Logo Leibniz Universität Hannover
Logo: SFB 871
  • Zielgruppen
  • Suche
 

Veröffentlichungen des SFB 871

Institutsübergreifende Veröffentlichungen

Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2018 2017 2016 2015 2014 2013 2012 2011 2010 alle Jahre

Internationale wissenschaftliche Beiträge in Fachzeitschriften, begutachtet

Berger, R.; Rogge, T.; Jansen, E.; Rolfes, R. (2016): Probabilistic vibration and lifetime analysis of regenerated turbomachinery blades, Advances in Aircraft and Spacecraft Science 3 (4), S. 503–521
DOI: 10.12989/aas.2016.3.4.503

Böß, V.; Denkena, B.; Wesling, V.; Kaierle, S.; Rust, F.; Nespor, D.; Rottwinkel, B.  (2016): Repairing parts from nickel base material alloy by laser cladding and ball end milling, In: Prod. Eng. Res. Devel. 10 (4-5), S. 433–441
DOI: 10.1007/s11740-016-0690-7

Gilge P.; Mulleners, K.  (2016): Resulting Aerodynamic Losses of Combinations of Localized Roughness Patches on Turbine Blades, AIAA Journal 54 (8), S. 2552–2555
DOI: 10.2514/1.J054602

Hartmann U.; Seume, J. R.  (2016): Combining ART and FBP for improved fidelity of tomographic BOS, Meas. Sci. Technol. 27 (9), S. 097001
DOI: 10.1088/0957-0233/27/9/097001

Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J. R.  (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis, In: J. Eng. Gas Turbines Power 139 (3)
DOI: 10.1115/1.4034449

Hohl A.; Wallaschek, J.  (2016): A Method to Reduce the Energy Localization in Mistuned Bladed Disks by Application-Specific Blade Pattern Arrangement, J. Eng. Gas Turbines Power 138 (9), S. 092502
DOI: 10.1115/1.4032739

Kellenbrink, C.; Helber, S. (2016): Quality- and profit-oriented scheduling of resource-constrained projects with flexible project structure via a genetic algorithm, In: European Journal of Industrial Engineering Volume 10, 2016
DOI: DOI: 10.1504/EJIE.2016.078807

Kuprat, T.; Nyhuis, P.  (2016): Designing Capacity Synchronization within the Regeneration of Complex Capital Goods, In: Universal Journal of Management 2016 (4(10)), S. 581
DOI: 10.13189/ujm.2016.041008

Nespor D.; Denkena, B.; Grove, T.; Pape, O.  (2016): Surface topography after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling, Int. J. Adv. Manuf. Technol. 85 (5-8), S. 1585–1602
DOI: 10.1007/s00170-015-7885-5

Pösch A.; Schlobohm, J.; Matthias, S.; Reithmeier, E.  (2016): Rigid and flexible endoscopes for three dimensional measurement of inside machine parts using fringe projection, Optics and Lasers in Engineering 2016
DOI: 10.1016/j.optlaseng.2016.05.023

Schlobohm J.; Bruchwald, O.; Frackowiak, W.; Li, Y.; Kästner, M.; Pösch, A.; Reimche, W.; Reithmeier, E.; Maier, H. J. (2016): Turbine blade wear and damage – An overview of advanced characterization techniques, Materials Testing 58 (5), S. 389–394
DOI: 10.3139/120.110872

Schlobohm J.; Pösch, A.; Reithmeier, E.; Rosenhahn, B.  (2016): Improving contour based pose estimation for fast 3D measurement of free form objects, Measurement 92 (92), S. 79–82
DOI: 10.1016/j.measurement.2016.05.093

Schlobohm, J.; Li, Y.; Pösch, A.; Kästner, M.; Reithmeier, E.  (2016): Multiscale measurement of air foils with data fusion of three optical inspection systems, In: CIRP Journal of Manufacturing Science and Technology 2016
DOI: 10.1016/j.cirpj.2016.07.006

Schlobohm, J.; Pösch, A.; Reithmeier, E. (2016): A Raspberry Pi Based Portable Endoscopic 3D Measurement System, In: Electronics 5 (3), S. 43
DOI: 10.3390/electronics5030043

Zou, Y.; Li, Y.; Kästner, M.; Reithmeier, E. (2016): Low-coherence interferometry based roughness measurement on turbine blade surfaces using wavelet analysis, In: Optics and Lasers in Engineering 82, S. 113–121
DOI: 10.1016/j.optlaseng.2016.02.011

Internationale Konferenzbeiträge, begutachtet

Adamczuk, R.; Seume, J. R. (2016): Numerical Evaluation of the Condition of a Jet Engine through Exhaust Jet Analysis, In: ASME (Hg.): Proceedings of the ASME Turbo Expo 2016

Böß, V.; Grove, T.; Denkena, B.; Mücke, A.; Nespor, D. (2016): Prediction of the Principal Stress Direction for 5-axis Ball End Milling, Procedia CIRP 45, S. 291–294
DOI: 10.1016/j.procir.2016.02.145

Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J. R. (2016): Automatic Detection of Defects in an Annular Swirl Burner Array Through an Exhaust Jet Pattern Analysis, Proceedings of the ASME Turbo Expo 2016, S. 1–10

Hauptmann, T.; Seume J.R. (2016): Aerodynamic Excitation for Variable Tip Gap, In: Proceedings of ASME Turbo Expo 2016: Turbomachinery Technical Conference & Exposition

Hurfar, C. Mandanna; Keller, C.; Mumcu, A.; Seume, J. R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields: Part II - Experimental Verification, In: Proceedings of the ASME Turbo Expo 2016, Seoul, South Korea

Kuprat, T.; Schmidt, M.; Nyhuis, P.  (2016): Model-based analysis of reassembly processes within the regeneration of complex capital goods, In: Procedia CIRP 2016 (55), S. 206

Mumcu, A.; Keller, C.; Hurfar, C. Mandanna; Seume, J. R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields: Part I - Design and Methodology, In: Proceedings of the ASME Turbo Expo 2016, Seoul, South Korea

Nicolaus, M.; Möhwald, K.; Maier, H. Jürgen  (2016): Regeneration of high pressure turbine blades. Development of a hybrid brazing and aluminizing process by means of thermal spraying, In: Proceida CIRP. The 5th International Conference on Through-life Engineering Services (TESConf 2016): Elsevier B.V, S. 5.

Schwerdt, L.; Hauptmann, T.; Kunin, A.; Wallaschek, J.; Wriggers, P.; Panning-von Scheidt, L. et al.  (2016): Aerodynamical and Strucutral Analysis of Operationally used Turbine Blades, In: 5th International Conference on Through-life Engineering Services, Cranfield, England

von der Haar, Henrik; Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J. R. (2016): Early Defect Detection on an annular Swirl-Burner-Array by Optical Measuring Exhaust Gases and Numerical Analysis, In: Proceedings of the ASME Turbo Expo 2016, June 13-17, 2016, Seoul, South Korea

Internationale Konferenzbeiträge, nicht begutachtet

Bruchwald, O.; Frackowiak, W.; Reimche, W.; Maier, H. Jürgen (2016): Applications of high frequency eddy current technology for material characterization of thin coatings, Proceedings 12th International Conference The "A" Coatings 2016, S. 37–43, Garbsen: PZH Verlag

Bruchwald, O.; Nicolaus, M.; Frackowiak, W.; Möhwald, K.; Reimche, W.; Maier, H. Jürgen (2016): Material Characterization of Thin Coatings Using High Frequency Eddy Current Technology., World Conference on Non-Destructive Testing; WCNDT. München.

Ernst, B.; Seume, J. R.; Herbst, F.  (2016): Probabilistic CFD-Analysis of Regeneration-Induced Geometry Variances in a Low-Pressure Turbine, In: 52nd AIAA/SAE/ASEE Joint Propulsion Conference, Propulsion and Energy Forum, Salt Lake City, Utah, USA, S. AIAA 2016--4555.

Frackowiak, W.; Bruchwald, O.; Reimche, W.; Maier, H. Jürgen (2016): Applications of high frequency induction thermography in the megahertz range for material characterization of turbine components, Proceedings 12th International Conference The "A" Coatings 2016, S. 31–36, Garbsen: PZH Verlag

Frackowiak, W.; Bruchwald, O.; Zwoch, S.; Reimche, W.; Maier, H. Jürgen (2016): Non-Destructive Damage Detection and Material Characterization of Turbine Components Using Megahertz Range Induction Thermography in Pulsed Mode, In: 19th Proceedings of World Conference on Non-Destructive Testing; WCNDT. Munich, Germany

Kaierle, S.; Rottwinkel, B.  (2016): Development of new laser technologies for repairing single crystal turbine blades, Int. Laser- und Fügesymposium. Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS. Dresden, 01.01.2016

Kunin, A.; Loehnert, S.; Wriggers, P. (2016): Thermo-mechanical contact between crack surfaces in the eXtended Finite Element Method, CMIS 2016: Contact Mechanics International Symposium. Warsaw, Poland

Kunin, A.; Loehnert, S.; Wriggers, P. (2016): Thermo-mechanical contact between crack surfaces in the eXtended Finite Element Method, ECCOMAS 2016: European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island

Li, Y.; Bossmeyer, H.; Kästner, M.; Reithmeier, E. (2016): Development of an edge sensor based on polyview optics and laser triangulation principle, In: International Society for Optics and Photonics (Hg.): SPIE/COS Photonics Asia (inproceedings) S. 100231

Nationale wissenschaftliche Beiträge in Fachzeitschriften, nicht begutachtet

Kellenbrink, C.; Helber, S. (2016): Controlling in Sonderforschungsbereichen, Forschung: Politik, Strategie, Management 9. Jahrgang (Heft 2, 2016) (2), 45-53

Kuprat, T.; Schmidt, M.; Nyhuis, P.  (2016): Gestaltung von Regenerationslieferketten - Bewertung der Synchronität mithilfe des Bereitsstellungsdiagrammes, In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 2016 (12), 809-812

Rust, F.  (2016): Werkzeugwege für den individuellen Reparaturfall, In: phi 2016, S. 3.

Nationale Konferenzbeiträge, nicht begutachtet

Berger, R.; Rogge, T.; Rolfes, R. (2016): Fast Methods for Structural Analysis of Gas Turbine Blades with Manufacturing Imperfections, Deutscher Luft- und Raumfahrtkongress, Braunschweig 13. - 15. September 2016

Hassel, T.; Langen, D.; Maier, H. J. (2016): Gefüge und Mechanische Eigenschaften impfbehandelter Schweißnähte an Titan, In: DVS Berichte Band 327, Große Schweißteschnische Tagung Leipzig. Düsseldorf, 49-53